Get A Quote Repeater Quote Form To add another product to your quote request, please select awning type below, otherwise please click 'Add Contact Details & Finish' button. Repeater Step 1 Select awning Slimline Louvers Gate and Doors Sliding Louvers Cantilever Louvres Step 2 Which slimline Awning would you like? Slimline 50 (50mm box frame) Slimline 50 Canter Lever Slimline 50 Under Eve Slimline 100 Range ↓ Selected Item Slimline 50 What We Need to Quote The Slimline 50 is mounted using welded brackets at either side of the awning. For larger awnings over 3000 mm wide, a centre welded bracket will also be required. This awning is typically used on timber-clad walls. The brackets are mounted at either end and must be fixed into timber studs or into brickwork. This will dictate the overall width of the awning. To provide you with an accurate quote, we will need the following information: Width – The width will depend on where the awning brackets can be fixed. Brackets must be mounted into solid fixing points such as timber studs (behind cladding) or brickwork. Your measurement should be taken between these fixing points, as this will determine the overall awning size. Projection – We can custom make the projection to suit you, with a maximum of 1065 mm. What the wall is made of – This will help us confirm that you have the right type of awning and ensure it can be fixed to your wall correctly. Colour of the frame and polycarbonate – This is not required for a quote, but it is something you will need to decide if you intend to go ahead. Uploading a picture – A picture tells a thousand stories. In most cases, if there is a problem with your wall or any issues, sending us a picture will allow us to confirm that the awning can be mounted to the wall. Slimline 50 Cantilever What We Need to Quote The Slimline 50 Cantilever is designed to be mounted to clad walls, with fixings secured directly into the timber studs behind the cladding. The cantilever brackets can be positioned to suit the location of the studs, enabling the awning to be set at whatever width is required. This flexibility ensures a secure fixing while maintaining a clean, streamlined appearance. To provide you with an accurate quote, we will need the following information: Width – If mounting over a door or window, we recommend adding approximately 200 mm to either side to help protect from weather. If you have side walls, the awning can be mounted from wall to wall. Projection – We can custom make the projection to suit you, with a maximum of 1065 mm. What the wall is made of – This will help us confirm that you have the right type of awning and ensure it can be fixed to your wall correctly. Colour of the frame and polycarbonate – This is not required for a quote, but it is something you will need to decide if you intend to go ahead. Uploading a picture – A picture tells a thousand stories. In most cases, if there is a problem with your wall or any issues, sending us a picture will allow us to confirm that the awning can be mounted to the wall. Slimline 50 Under Eave What We Need to Quote The Slimline 50 Under Eave is designed for situations where the awning needs to be mounted on the fascia, with the brackets fixed to the wall. This setup allows you to gain additional height, or is used in situations where there is no room to mount the awning directly onto the wall. It provides a practical solution for maintaining proper clearance and ensuring a neat, functional installation. To provide you with an accurate quote, we will need the following information: Width – If mounting over a door or window, we recommend adding approximately 200 mm to either side to help protect from weather. If you have side walls, the awning can be mounted from wall to wall. Projection – We can custom make the projection to suit you, with a maximum of 1065 mm. What the wall is made of – This will help us confirm that you have the right type of awning and ensure it can be fixed to your wall correctly. Colour of the frame and polycarbonate – This is not required for a quote, but it is something you will need to decide if you intend to go ahead. Uploading a picture – A picture tells a thousand stories. In most cases, if there is a problem with your wall or any issues, sending us a picture will allow us to confirm that the awning can be mounted to the wall. Slimline 100 What We Need to Quote The Slimline 100 is mounted using internal brackets hidden on either side of the awning. For larger models over 3000 mm wide, a centre bracket will also be required. These brackets must have a solid fixing — either into brick or concrete walls. If mounting to cladded walls, there must be timber studding behind the cladding for the brackets to fix into. To provide you with an accurate quote, we will need the following information: Width – If mounting over a door or window, we recommend adding approximately 200 mm to either side to help protect from weather. If you have side walls, the awning can be mounted from wall to wall. Projection – We can custom make the projection to suit you, with a maximum of 1065 mm. What the wall is made of – This will help us confirm that you have the right type of awning and ensure it can be fixed to your wall correctly. Colour of the frame and polycarbonate – This is not required for a quote, but it is something you will need to decide if you intend to go ahead. Uploading a picture – A picture tells a thousand stories. In most cases, if there is a problem with your wall or any issues, sending us a picture will allow us to confirm that the awning can be mounted to the wall. Privacy Screen Louvres What We Need to Quote To provide an accurate quote for your privacy screen, we’ll need the following information: Width and height — the tight size of the opening where the screen will be installed Blade type — choose either 160mm or 85mm elliptical blades Blade orientation — are the blades running vertically or horizontally? Providing this information helps us quote accurately and ensure the product is custom-made to suit your space. How Louvre Sizing Works — and What to Do About Gaps Louvre blade sizes are measured from the first blade to the last. Because the blades are angled and overlap, panel widths (or heights) increase in set increments based on the blade size — not millimetre by millimetre. For horizontal louvres with 160mm blades, the panel width increases in steps: 1616mm, 1766mm, 1916mm, and so on — each step adds one blade.For vertical louvres with 85mm blades, the total panel width increases in 80mm increments per blade. So sizing would typically step from 881mm to 961mm to 1041mm, and so on. This stepped sizing is referred to as a blade-to-blade measurement. If the size doesn’t line up exactly with your opening, don’t worry — we can provide tailored solutions to close any gap. Every louvre system is custom-made, so we’ll work with you to ensure it fits your space cleanly and functions just as intended. Gates & Fences What We Need to Quote To provide an accurate quote for your gate or fence, we’ll need a few key details: Width of the opening — the total space between posts or walls Desired height — how tall you’d like the gate or fence to be Wall types — let us know if the gate or fence will be fixed to brick, concrete, or timber walls It’s also helpful to specify the type of gate you're after — for example, a single gate, double gate, or a gate with side panels or fixings. You can include these details in the notes section of your enquiry. And if possible, please upload a photo of the space. A clear image helps us understand the layout and recommend the most suitable fixing and frame options — saving time and ensuring a better fit. How Louvre Sizing Works — and What to Do About Gaps Louvre blade sizes are measured from the first blade to the last. Because the blades are angled and overlap, panel widths (or heights) increase in set increments based on the blade size — not millimetre by millimetre. For horizontal louvres with 160mm blades, the panel width increases in steps: 1616mm, 1766mm, 1916mm, and so on — each step adds one blade. For vertical louvres with 85mm blades, the total panel width increases in 80mm increments per blade. So sizing would typically step from 881mm to 961mm to 1041mm, and so on. This stepped sizing is referred to as a blade-to-blade measurement. If the size doesn’t line up exactly with your opening, don’t worry — we can provide tailored solutions to close any gap. Every louvre system is custom-made, so we’ll work with you to ensure it fits your space cleanly and functions just as intended. Sliding Louvres What We Need to Quote To provide an accurate quote for your sliding louvre system, we’ll need the following details: Width and height of the opening — the total size where the louvres will be installed Track configuration — how many tracks you would like Panel quantity — how many sliding panels you’re after All sliding louvres are top-hung, so the track will be fixed at the top of the opening. If possible, please include a photo of the space — this helps us understand the layout and recommend the best configuration. Any extra details you can include in the notes will also help us quote accurately. How Louvre Sizing Works — and What to Do About Gaps Louvre blade sizes are measured from the first blade to the last. Because the blades are angled and overlap, panel widths (or heights) increase in set increments based on the blade size — not millimetre by millimetre. For horizontal louvres with 160mm blades, the panel width increases in steps: 1616mm, 1766mm, 1916mm, and so on — each step adds one blade. For vertical louvres with 85mm blades, the total panel width increases in 80mm increments per blade. So sizing would typically step from 881mm to 961mm to 1041mm, and so on. This stepped sizing is referred to as a blade-to-blade measurement. If the size doesn’t line up exactly with your opening, don’t worry — we can provide tailored solutions to close any gap. Every louvre system is custom-made, so we’ll work with you to ensure it fits your space cleanly and functions just as intended. Cantilever Louvres What We Need to Quote To quote your cantilever louvre system, we’ll need the following details: Width of the area to cover — typically measured across the opening (e.g. a door or window). You may want to allow an extra 200mm or so on each side for better coverage. Projection — how far out from the wall you'd like the louvres to extend. If it’s for a BASIX requirement, you’ll need to check what the projection requirements are for your particular site. Wall construction — knowing what the wall is made of is essential. If the walls are brick or concrete, installation is straightforward. If the walls are cladded, you’ll need to identify where the timber structure is behind the cladding so the brackets can be fixed securely. Including a photo and any extra information in your enquiry will help us quote more accurately and design the system to suit your site. Step 2 Enter the information for the awning. Step 3 Enter the information for the awning. How wide would you like the awning? How far would you like the awning to project (max 1065mm)? How wide would you like the Cantilever Louvre? How far would you like the louvre to project from the wall? How wide would you like Louver? How high would you like Louver? How wide is the door/gate opening? How high do you want the door/gate? How wide is the sliding louvre opening? How high is the sliding louvre opening? What colour would you Like the Polycarb? Select polycarb colourOpal /WhitePlatinumGreyBronzeClearOther What colour would you Like the Polycarb? What colour would you like the aluminium frame Select frame colourSatin BlackPearl whiteMonumentwoodlands GrayShale GrayPaper BarkSurfmistWindsprayClassic CreamDuneGullyJasperWallabyBasaltIronstoneNight SkyOther What colour would you like the aluminium frame How many tracks would you like? How many panels would you like? What is the wall made of? Select wall madeBrick wallConcrete wallInsulated PanelTimber Stud wall with claddingAerated ConcreteOther What is the wall made of? What direction would you like Louver? Select blade directionVerticalHorizontal What size louver blade? Select blade size85 Adjustable Blade160 Adjustable Blade85 Fixed Blade160 Fixed BladesOther What size louver blade? What colour would you like louver? Select louver colourSilverPearl whiteMonumentwoodlands GrayShale GrayPaper BarkSurfmistWindsprayClassic CreamDuneGullyJasperWallabyBasaltIronstoneNight SkyOther What colour would you like louver? Upload Images Upload Picture Maximum file size: 5MB Helps confirm the right product and design, and ensures there are no problems with fixing or installation on site. Notes Additional Notes or Site-Specific Requirements (to help refine pricing accuracy) Step 3 Click the "Add Product To Quote List" button below Step 4 Click the "Add Product To Quote List" button below Add Contact Details & Finish → Cancel plus1 Add Product To Quote List minus1 Remove Page 3 Contact Information First Name * Last Name Email Address * Contact Number * Street Address Suburb * Postcode Default Section Remove this product? This product will be deleted from your selection and cannot be undone. Delete Cancel Sending quote request... Adding product to the quote list Submit Request →
